Cookie Img
Back to top
Send SMS Send Inquiry
Home » Products » Saddle Type Pipe Beveling Machine » Model 200C

Model 200C

Model 200C
Model 200C
Product Code : 22
Product Description

Model 200C

Setting and Operating Instructions

All compact Pipe Cutting and Beveling Machines are set up and operated in generally the same manner.

  • Consult the spacer chart (in box with spacers) for the correct spacer and screw spacers in place. Spacers should be tightened but not overly tight.
  • Mount machine on pipe. Release boomer and either set machine over the end of the pipe or crank the ring around until the smaller segment lines up with the open end of the frame. Release the latch, swing the ring open and set the machine over the pipe. Close and latch the ring.
  • Adjust the boomer by hooking the boomer hook to the boomer eye, leaving the boomer in the open or wide position. Then, connect the swivel snap to the correct link that offers the least amount of slack in the chain. Snap the boomer closed and the machine is mounted. This adjustment is only necessary when changing pipe sizes.
  • Adjust the torch holder for the correct angle, lead and clearance.

Operation

For best results in flame cutting/beveling, the torch should be lighted and cranked around the line to be cut. This will remove loose scale and other impurities that may interrupt the cut, also lightly preheating the section to be cut. Then start at the top of the pipe and crank the torch back and forth to preheat, blow through, crank clockwise on around the pipe. If pipe is not round, use the Model 281 Out-of-Round Torch Carrier, standard on No. 3 machines and larger. For cutting out welds, the double bevel attachment allows use of two torches and cuts both bevels simultaneously. When using the electric motorized kit, preheating is done by switching the unit from forward to reverse and back and forth until ready to cut. Then, turn on oxygen for cutting and proceed to cut. Control should be on forward position when cutting. Correct selection of tip, gas pressure, equipment maintenance, and right torch speed will guarantee a high quality cut/bevel.

Setting and Operating Instructions

Machine Number

Pipe Size

Weight

in

mm

lb

kg

1

3-8

76.2-203.2

38

17.2

2

8-14

203.2-355.6

40

18.1

3

14-20

355.6-508.0

50

22.7

4

22-26

558.8-660.4

60

27.2

5

26-30

660.4-762.0

83

37.6

6

30-36

762.0-914.4

90

40.8

7

38-42

965.2-1066.8

140

63.5

8

44-48

1117.6-1210.2

152

68.9


PIONEER INTERTRADE PVT. LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



301-303, 'A' Wing, Durian Estate, Goregaon-Mulund Link Road, Goregaon (East), Mumbai - 400063, Maharashtra, India
Phone :+917533008441
Fax :91-22-66783161
Mr. Prakash Khandelwal (MANAGING DIRECTOR)
Mobile :+917533008441
Trust Stamp
Product Showcase
Send SMS Send Inquiry